8-Steps to Take When Wavlink Extender Not Working

Wavlink Extender Not Working

Here are some steps to take when your WAVLINK extender is not working:

  • Check the power supply: Make sure that the extender is properly plugged into a working power outlet and that the power LED is illuminated.
  • Check the network connection: Verify that the extender is properly connected to your router or modem via Ethernet cable or WiFi connection.
  • Check the WiFi settings: Ensure that the WiFi network name (SSID) and password on the extender match those of your main network.
  • Reset the extender: Try resetting the extender to factory default settings by holding down the reset button for 10-15 seconds. Note that this will erase all previously configured settings.
  • Check for firmware updates: Visit the WAVLINK website to see if there are any firmware updates available for your extender, and if so, follow the instructions for updating the firmware.
  • Reboot your network: Restart your router, modem, and extender to refresh the network connection.
  • Relocate the extender: Try moving the extender closer to the router or to a different location in your home or office where it can receive a stronger signal.
  • Contact WAVLINK support: If none of the above steps resolve the issue, contact WAVLINK support for further assistance or to request a replacement unit if necessary.

By following these steps, you may be able to resolve the wifi.wavlink.com not working issue and get it working again.