Wavlink Extender Setup & Login
Live Chat with our experts & get real-time answers to all your queries.
Call us to discuss your Wavlink issues with our experts and get the solution.
The Wavlink Extender Login and Wavlink Extender Setup processes are as simple as that. Although these processes do not require any technicians, users can do these themselves using a web browser on any device. But, users must know the essential points to perform these procedures.
Pre-requisites of Wavlink Extender Setup
Prior to initiating the processes, keep in mind a few things that you will require during the login and extender setup. Here is a list of these
These are the only things that you will need in the extender login and setup. Now, let’s go to the login method.
Wavlink Extender Login Method
To log in to the Wavlink extender page, plug the extender into a power socket and verify the LED indication. Read the rest of the directions to proceed further
Note: You can also use the extender’s IP address instead of the web address. Here the IP address is 192.168.10.1.
Specification of LED Lights of Wavlink Extender
Power LED Light:
When you bond your Wavlink extender to the wall socket then the power LED light shows that your Wavlink device is in the working process. If the power LED light of the Wavlink extender turns solid it means that your extender is powered on.
Note: If the power LED light of the Wavlink extender does not blinks solid then it means your Wavlink extender does not properly link to the power outlet.
WPS LED Light
WPS led light starts blinking when the WPS connection is in working progress. When WPS led light glows solid it means the connection between the extender and router is successfully done.
Note: If WPS led light does not blink solid it means that the WPS function of a Wavlink extender is disabled.
Signal LED Light
If the signal Led light of the Wavlink WiFi extender turns solid blue then it means your Wavlink WiFi extender setup is successfully done and the placement of Wavlink WiFi extender is perfect. If you see a red led light on your Wavlink WiFi extender then it means your extender is so far away from the host router. So, locate your extender nearest to the router.
Wavlink Extender Setup For Different Models
Generally, there are three ways to configure the Wavlink Extender Setup for different models. These are web-based setup, WPS, and the manual method. Follow the instructions for separate models
Wavlink AC1200 Setup
First, fix the extender into the power plug. Then, open the web browser on your device. Search the extender’s default web or IP address and log in to the setup page. Go to the Setup option in advanced settings and insert the password for your existing network. Thus, the installation is complete.
Wavlink AC600 Setup
Initially, plug the extender into the power socket and press the extender’s WPS button. Next, push the WPS button of the router. Wait till the extender connects to the router. After this, visit the extender’s web-based setup page on your device. Now, configure the extender by selecting the Setup option.
Wavlink WN578X3 Setup
Plug the extender into the power outlet. Find the extender’s SSID network on your wireless device and connect to it. However, for a laptop or PC, you can use the LAN port of the extender. After connecting to the SSID, the login page will appear on the device. Do log in there and start the Setup Process.
Specifications of Wavlink AC1200 Model
Specifications of Wavlink AC600 Model
Specifications of Wavlink WN578X3 Extender
Note: It is not compulsory that you can only do the setup of Wavlink extender by only one method. Note that you can set up your Wavlink extender device also by different ways.
Wavlink Extender Setup to Router Via WPS
Installation of Wavlink Extender to Router Via Web UI
Wavlink WiFi Extender Setup to Router Manually
Facing Errors During Login Setup?
You might face some problems while doing the extender’s login. There may be any kind of reason behind the difficulties. Just look at some common reasons
Verify these points at least once before starting the login procedure. Make sure that your router’s internet connection is active. Use a new and working ethernet wire. The extender and router must be connected. In addition, use the extender’s correct web or IP address.
Not Able to Use Wavlink Extender Setup Properly?
In case you face any issues while using the extender, utilize certain troubleshooting ways to fix the errors
Note: If you are still facing an issue, try these additional methods:
Upgrade Software Via Wavlink Extender Login
After trying the above troubleshooting method if you are still facing an issue then we suggest you update the firmware of your extender. If you don’t know how to upgrade the software of the Wavlink extender then just follow these below few steps.
Power Cycle Wavlink Extender (Power On/Off Wavlink Extender)
If you fail after trying the above method then you can also try the next one. It is a very simple or easiest method to solve the issue of the Wavlink extender. Consider these steps.
Link Extender To Router Via Ethernet Cable
This method is not so technical but also not so easiest. Consider the below steps to do this method.
Note: Make sure that your WiFi gadget (computer) must be connected to the router through an ethernet cable and that it can remain in that location.
Change WiFi Channels of Router
After trying these additional three methods, if you are still facing an issue with the Wavlink extender setup, don’t worry. If you have a dual-band WiFi router then you can easily change the WiFi channels of the Wavlink router.
Many routers have several types of WiFi channels that are available for signal re-broadcasting. Replace the WiFi channel if one is inferring with another one. Just follow these few steps to do this method.
Reset Wavlink WiFi Extender
After trying all the additional solutions, if you are still facing an issue with the Wavlink WiFi extender then you can try this last method.
Note: After resetting you will require to do the Wavlink extender setup again.
Common Wavlink Extender Setups
Some Issues You Might Face
If you are facing any issues then please contact us, and we will be happy to help you.