A Comprehensive Guide to Setting Up Your Wavlink Extender

With the assistance of this comprehensive guide to setting up your Wavlink extender device, you can boost the range of WiFi signals. In this blog, you will be able to know the proper information regarding the login and configuration process of the Wavlink extender device.

How To Access Into Wavlink Extender Login Page

First, with an ethernet cable connect the extender and computer to each other.
With the use of an SSID and password, you can also attach an extender to the computer.
If you don’t know the SSID and security password, then you will need to check the tag at the bottom of the device.
After that, open chrome and enter the wifi.wavlink.com web address in the search field.
Now, insert admin in both SSID and password fields and select the language that you prefer.
As a result, now you will successfully visit the Wavlink extender login page.

Note: In case, if you are facing any issues with the Wavlink extender during the login process, then observe lower solution tips.

Tip 1- Effective Contact:

The Wavlink extender login page is built under the web browser. It does not need any internet access but it needs the physical connection between the Wavlink extender and router device. Now, connect your computer to the Wavlink device LAN port by an ethernet cable.

Note: Several wavlink devices do not have the LAN port. So, please connect it to the wireless network.

Tip 2- IP Address Information:

To visit the web management page, your computer and laptop must have an IP from Wavlink gadgets. Many of the Wavlink devices support the DHCP function which is enabled by default.

You will need to configure the manual IP address for your computer and laptop to visit the Wavlink extender login page.

Tip 3- Check Web Browser Settings:

In the address field of navigation, fill in the IP address of the Wavlink extender device. Due to an outdated web browser, you can face login issues in the Wavlink extender. We suggest you improve/upgrade your web browser from time to time.

Common Needs To Do Wavlink Extender Setup

You must have your own Wavlink extender and host router.
Need one active power socket.
Require long network cable.

Without these things, you can’t do the Wavlink extender setup process.

Conditions To Do Wavlink Extender Setup

Do not place your Wavlink extender far away from the router.
Check your Wi-Fi-containing gadget perfectly links to the Wavlink extender network.
Using the same security password does not connect your extender to the host router.
Near electronic gadgets do not locate your Wavlink extender.

How To Do Installation Of Wavlink WiFi Extender

There are two methods to do the installation process of the Wavlink WiFi range extender.

By Wavlink Application.
Via pushing the WPS button.
By An Ethernet Cable.

By Wavlink Application: Do Wavlink Extender Setup

First, open google play or apple store on your android or iOS mobile phone.
Now, search for the Wavlink application on them.
After that, download and open that application.
Now, fill in all the details which are shown on the application.
If you are a first-time user then tap on sign up.
In the end, follow all the information shown on the display.

After completing the Wavlink extender setup process, you can change the position of your extender where you want.

By WPS Button: Do Wavlink Extender Installation

By pushing the WPS button you can easily connect your extender to the host router. Observe the lower steps to start this method.

Initially, put the Wavlink extender plug in a wall socket.
Now, push the extender and host router WPS buttons.
After that, you can see the solid blue LED on both the extender and router gadget.
Hence, it means the configuration process of the Wavlink extender is now completely done.

By An Ethernet Cable: Do Wavlink Extender Setup

First, take one ethernet cable, which came with the Wavlink extender device.
Now, attach one end of the ethernet cable to an extender ethernet port and the remaining end of the wire to the router ethernet port.
After that, open a search engine and insert wifi.wavlink.com in the web browser URL bar.
In the end, read and follow all the instructions step by step to do the Wavlink extender configuration process.

Daily Issues Which People Face In Their Wavlink Extender Device

There is no internet connection in the Wi-Fi-containing gadget.
The authorised website of the Wavlink extender does not work perfectly.
The security passcode does not work perfectly.
Fails to link with the network.
Due to the coming red light in the Wavlink extender.

These are the few types of reasons why you are unable to connect an extender to the main router.

Problem-Solving Tips:

Verify the gap between the extender and router.
Power cycle your Wavlink extender device.
Check the position of the Wavlink extender device.
Remove all additional gadgets from the list of Wavlink extender networks that are not in use.
Swap all the damaged wires with new ones.
See the LED status of the Wavlink extender device.
Perfectly located the Wavlink extender power plug in an electrical socket.

After trying the above seven solution tips, if the extender issue is not solved then try out the below additional tips to fix them,

Improve The Software Of the Wavlink WiFi Range Extender

Due to the outdated firmware of the Wavlink extender device, you can face trouble after the setup process in your Wavlink extender device.

First, you will need to open a search engine.
Now, enter the web address of the Wavlink extender in the URL bar of a web browser.
Further, the Wavlink extender login page will open up on your screen.
To go to the settings, fill in all the credentials which are shown on the login page.
Next, select an administration option, and after that pick the software upgrade option.
In the end, wait for a short while to download the upgrade firmware file of the Wavlink extender on your laptop or computer.

Reset Your Wavlink WiFi Extender Device

This is the last method to fix the Wavlink WiFi extender issue. Observe the lower steps to do the configuration process of the Wavlink WiFi range extender.

First, you will need to take a paperclip.
Now, find the reset hole button. (Reset hole button is located at the backside of an extender)
Next, insert the paper clip in the reset button for 8 to 10 seconds or until you hear a sound like a clock.
Further, you can see all the LEDs of the Wavlink extender device will turn off.
Hence, it means your Wavlink extender device is now completely reset.

Note: After doing the reset process of the Wavlink extender you will need to do the installation process of the Wavlink extender again.

With the help of this article, you will easily be able to do the login and installation process of the Wavlink extender. After trying the above solution tips, if the Wavlink extender device issue is not solved then you will need to contact our technical team experts to fix the issue. Stay tuned for more updates.