How To Do Wavlink AC600 Setup Using Web Interface?

Wish to configure your Wavlink AC600 device but muddle how? Answer to your confusion is on this page, read out up to the last and gather details. Wavlink AC600 setup is a smooth process to follow by using a web interface. Web based configuration allows you to not only set up the device but also manage the network. Step by step breakdown of the setup process is described here, follow it to upgrade your network with wavlink.

How to Setup Wavlink AC600?

Wavlink AC600 Setup using a web interface can be done very easily by using a laptop or computer device. To configure the wavlink AC600 device you also need a stable internet connection, a host device, power outlet & ethernet cable. If you have all such requirements then move further to add up the device to your current network.

Locate, Boot Up & Connect

• Firstly, find a location to keep the wavlink AC600 device. Better to put near the host device for setup.
• Secondly, supply power to the wavlink AC600 & let the device boot up.
• Thirdly, form a connection between the wavlink AC600 & computer/ laptop device you are about to use to access the web interface.
  • Use ethernet cable to connect.
  • Or access the wireless network with default credentials.

Access Admin Panel

• Moving further in the Wavlink AC600 Setup, launch web browser.
• Thereafter, browse default IP or wifi.wavlink.com web address.
• Once reached, use default credentials to access the admin panel.

Configure Wavlink AC600

• Initiate the configuration by securing your admin account.
• Create a strong but memorable password for admin access.
• Moving further, mention host device SSID & Password.
• Hit connect and then create a wireless network name for Wavlink AC600 network.
• Also don’t forget to create a strong password.
• Check for firmware version & install the latest one.
• End the setup after configuring all the significant settings.

Relocate The Device & Test Network

• For best performance of Wavlink AC600 device, relocate it.
• While relocating the device make sure to keep it within the range of the host networking device.
• Also keep it away from any network interferer object.
• After placement is done, boot up the device again.
• Then take a wifi enabled device to test the network.
• Connect the device to the new network and use the internet.

How to Optimize the Network?

You can easily optimize the network by updating the firmware and securing the access of the network. Also you need to place the device strategically for better signal coverage. Furthermore, manage the connected device to the network for best performance. With access to the login page you can easily update the firmware & optimize the device security settings. You can restrict the number of devices to connect with your wavlink network simultaneously.

Conclusion

Wavlink AC600 setup & network optimization is not as daunting a task as you think. It hardly requires technical knowledge to add devices in your existing network. With step by step instructions given above, it becomes easier. In case you need technical help then connect our experts on the below given contact number.