Facing issues while carrying out the Wavlink router login process using wifi.wavlink.com is quite common. The potential reasons behind it can be numerous. Some common reasons can be incorrect hardware connectivity, using incompatible internet browsers, device specific issues, pending updates and many more. But the relieving part here is that this wifi.wavlink.com not working issue is easy to resolve. The guidance for the same is provided in this blog post. The guide covers effective solutions that will surely eradicate the issue. 

✓ Ensure Accurate Hardware Connections 

Proper hardware connectivity is non-negotiable for eradication of wifi.wavlink.com not working issue. So first up, ensure the proper connection of the power adapter to the Wavlink device and then to the electrical socket. The socket should function appropriately. It means the power supply should be uncut.

Next up, if you are using ethernet wire for connecting Wavlink device and the device that you are using for the login, then ensure the cable is attached properly and to the right ports. Recheck if the ethernet wire has any cuts or bruises, if found then replace it with the new one. 

✓ Use IP Address For The Login

Any typing mistake in the web login address will lead you towards the issue of wifi.wavlink.com not working. So first up make sure you do not put up extra space or use upper letter case. The exact web address is http://wifi.wavlink.com. But in case, this address doesn’t take you to the login page, then there is an alternative for it. It is using the IP address. By default it is 192.168.10.1. 

✓ Check For Browser Issues 

Yet another major culprit behind wifi.wavlink.com not working can be the browser itself. Therefore select a browser which is compatible. We recommend using internet explorer, chrome, firefox, edge or safari. As all five of them are compatible with the Wavlink devices. 

Moving further, for smooth login ensure the chosen browser is operating on its latest available version. Additionally, erasing off browser cookies can also eradicate the web address not working issue. 

✓ Device Rebooting Can Solve The Glitch 

Minor glitches like wifi.wavlink.com not working can sometimes be erased through simple rebooting. To reboot the device follow three simple steps that are: 

• Start by withdrawing the electrical supply by detaching the device from the main socket.
• Thereafter hold on for as long as possible but at least for a minute. 
• Finally, replug. 

With these three simple steps, the problem might erase off. But if it still persists, then factory reset is the option that can lend a helping hand. 

✓ Factory Resetting 

Factory Resetting means moving the Wavlink device back to its original condition. To perform the same, follow these steps:

• Activate the Wavlink device. Ensure its proper boot up. 
• Thereafter, search out the reset key. Usually found at the bottom panel or at the back side. 
• Now either use a paperclip or a sim tray release pin, for nudging the key. Do not release it rather keep hold on it for not less than seven to eight seconds. 

Here the factory reset completes. Now from the very beginning perform the login process using wifi.wavlink.com. 

If the problem still exists, then reaching out to the experts is a solution.